CAB WINDOWS REPLACEMENT (CCE MACHINE) - CONTINUED
INSTALLATION - CONTINUED
Do not use too much force when positioning bottom of glass. Damage to glass could result.
Use assistance to position bottom of glass (4) into
channel of seal (2) as far as possible.
Install glass (4). Use seal installer tool (3) to lift edge
of seal (2) around circumference of window, so glass
can slip into position.
Inspect seal (2) in rear window, inside of cab. Make
sure edge of seal is over glass (4).
Lock seal (2) in rear window, outside of cab. Apply
detergent and water solution to locking lip (5) around
circumference of seal.
With seal installer tool (3), insert curved end between
locking lip (5) and groove at any point away from
butted ends. Work seal installer tool along groove until
locking lip is locked into position around circumfer-
ence of window.
END OF WORK PACKAGE