LOWER-FRONT WINDOWS MAINTENANCE (CCE MACHINE) - CONTINUED
When working with glass, always wear safety goggles and protective gloves. Failure to take precautions
could cause injury to personnel.
This procedure covers maintenance of the left-lower-front window. Follow these instructions for the lower-
Install 34 new screw inserts (29) in outer and inner window frames (13 and 28).
Install tape (27) in inner window frame (28) with adhesive backing on lip of inner window frame. Surface must be clean
and dry. Cut new bulk tape material to size if necessary.
Install glass (26) and seal (25). Seat lip of seal between glass and inner window frame (28), work lip of seal around inner
window frame until ends meet and glass is secured in inner window frame. Cut new bulk seal material to size if neces-
Install handle (21) and two screws (20).
Install handle (18) and two screws (19).
Install pivot (17) and three screws (24).
Install pivot (23) and four screws (22).
Install catch (14) and two screws (15) on outer win-
dow frame (13).
Install seal (16). Seat lips of seal into grooves of cab
frame, and work seal around cab frame.
Position inner window frame (13) against cab wall in
front-left-inside of cab.
Install 13 screws (12). Move inner window frame (13)
to align holes.