STEERING HOSES, LINES, AND FITTINGS: STEERING VALVES TO STEERING
CYLINDERS REPLACEMENT (SINGLE VALVE DESIGN) - CONTINUED
REMOVAL - CONTINUED
Tag hose assemblies before disconnecting to aid in installation.
This procedure covers removal of three right side hose assemblies of steering valve. Follow these
instructions for remaining three left side hose assemblies.
This procedure covers removal of two hose assemblies of the right steering cylinder. Follow these
instructions for remaining two hose assemblies on left steering cylinder.
Disconnect hose assembly (4) from valve port on top-right of steering valve (1).
Remove connector (2) and preformed packing (3). Discard preformed packing.