STEERING HOSES, LINES, AND FITTINGS: STEERING VALVES TO STEERING
CYLINDERS REPLACEMENT (SINGLE VALVE DESIGN)
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
Tools and Special Tools
Machine parked on level ground (TM 5-3805-261-
Shop equipment, common no. 1 (Item 75, WP 0348
Parking/emergency brake applied (TM 5-3805-261-
Implements lowered to ground (TM 5-3805-261-
Engine off (TM 5-3805-261-10)
Battery disconnect switch in OFF position (TM 5-
Packing, preformed (5)
Do NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing injury to personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may cause injury to personnel.
Lubricating/hydraulic oils, engine coolant, fuel, and other fluids used in the performance of mainte-
nance can be very slippery. Immediately wipe up any spills. Failure to follow this warning may cause
injury to personnel.
For hydraulic pressure relief, ensure supplemental steering is off.
Operate each implements control lever.
Turn steering wheel back and forth.
Remove hydraulic tank cap.
Install hydraulic tank cap.