REAR WHEELS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Loosen 10 nuts (1).
Position hydraulic jack under machine and raise rear wheels off ground high enough to position jack stand.
Position jack stand under machine.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
Rear wheel weighs 430 lb (195 kg).
Attach sling around rear wheel (3).
Remove 10 nuts (1) and washers (2).
Remove rear wheel (3) from machine.