FRONT WHEELS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
This procedure covers replacement of the right front wheel. Follow these instructions for the left front
Some machines have 10 bolts instead of 10 nuts.
Loosen 10 nuts (1).
Position hydraulic jack under machine and raise front wheels off ground high enough to position jack stand.
Position jack stand under machine.
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
Wheel and tire weighs 485 lb (220 kg).
Attach sling around front wheel (3).
Remove 10 nuts (1) and washers (2).
Remove front wheel (3) from machine.