FUEL TANK MAINTENANCE - CONTINUED
REMOVAL - CONTINUED
Remove three nuts (33), six washers (32), and three
bolts (31) from lower sides of fuel tank (2).
Use sling to lift fuel tank (2) up 6 in. (15 cm) and
remove fuel tank from machine.
Support fuel tank (2) on wood blocks.
CLEANING AND INSPECTION
Compressed air used for cleaning purposes must not exceed 30 psi (207 kPa). DO NOT direct compressed
air against human skin. Make sure air stream is directed away from user and other personnel in the area.
Wear protective goggles or face shield. Failure to follow this warning way cause injury to personnel.
Steam clean fuel tank. Dry thoroughly with compressed air.
Clean and inspect all other parts in accordance with WP 0020 00.