WHEELS AND TIRES MAINTENANCE. (cont)
Wheels and Tires Removal. (Sheet 3 of 4)
Position jack (3) to lift vehicle high enough
to raise wheels off ground and to position
jack stand (4, Figure 10-2).
Position jack stand (4) under vehicle.
Weight of front wheel assembly is approximately 485
lbs. Weight of rear wheel assembly is approximately
430 lbs. Use suitable hoist and sling to perform this
task. Failure to do so may cause INJURY. If you are
injured, seek medical aid immediately.
assembly (Figure 10-1).
Remove ten nuts (1) and washers (2).
Remove wheel assembly.
Clean all parts. Refer to Chapter 2.
Inspect all parts. Refer to Chapter 2.
Go to Sheet 4