Section I. WHEELS AND TIRES TROUBLESHOOTING.
GENERAL INFORMATION. This section lists the common wheels and tires malfunctions which may occur during
the operation of the 13OG Grader. You should perform the tests, inspections and corrective actions in the order listed.
Follow the troubleshooting procedures listed below step-by-step until you can go no further.
WHEELS AND TIRES TROUBLESHOOTING PROCEDURES. This section cannot list all possible malfunctions,
nor can it list all possible tests, inspections or corrective actions. If a malfunction is not listed, contact your supervisor.
WHEELS AND TIRES TROUBLESHOOTING AND MAINTENANCE PROCEDURES.
TEST OR INSPECTION
TIRE WEARS UNEVENLY.
Step 1. Check for proper tire inflation. Refer to TM 5-3805-261-10.
Inflate tires to correct pressure. Refer to TM 5-3805-261-10.
Step 2. Check the lugnuts. Refer to TM 5-3805-261-10.
Tighten lugnuts. Refer to Paragraph 10-4.
Step 3. Contact Direct Support.
WHEEL BENT OR CRACKED.
Check the wheel.
Replace wheel, if necessary. Refer to paragraph 10-4.