REMOVAL - TM-5-3805-261-20

TM-5-3805-261-20 Grader Heavy Road Motorized (Caterpillar Model 130 G) Manual
Page Navigation
587

TM 5-3805-261-20 WIRING HARNESS MAINTENANCE. (cont) 7-124. Blade Float Valve Harness. (Sheet 2 of 2) REMOVAL 1. Detach clip (4) from main harness and blade float valve harness (3, Figure 7-206). 2. Disconnect blade float valve harness (3) from main harness. 3. Remove bolt (1) and washer (2). 4. Remove blade float valve harness (3) from blade float pilot valve. CLEANING Clean all parts. Refer to Chapter 2. INSPECTION Inspect all parts. Refer to Chapter 2. INSTALLATION 1. Install blade float valve harness (3, Figure 7-206) to blade float pilot valve. 2. Install washer (2) and bolt (1). 3. Connect blade float harness (3) to main harness. 4. Attach clip (4) to main harness and blade float valve harness (3). NOTE Return 130G Grader to original equipment condition. Figure 7-206 End of Task 7-324

Privacy Statement
Press Release
Contact