Section V. STEERING CONTROL CONSOLE TROUBLESHOOTING.
GENERAL INFORMATION. This section lists the common steering control console malfunctions which may
occur during the operation of the 1300 Grader. You should perform the tests, inspections and corrective actions in the
order listed. Follow the troubleshooting procedures listed below step-by-step until you can go no further.
STEERING CONTROL CONSOLE TROUBLESHOOTING PROCEDURES. This section cannot list all possible
malfunctions, nor can it list all possible tests, inspections or corrective actions. If a malfunction is not listed, contact your
STEERING CONTROL CONSOLE TROUBLESHOOTING AND MAINTENANCE PROCEDURES.
TEST OR INSPECTION
a. STEERING CONTROL CONSOLE SUPPORT MOVES WITHOUT LEVER DISENGAGEMENT (Figure 7-31).
Check the steering control console support.
If the support is damaged or defective--replace. Refer to paragraph 7-33.
b. STEERING CONTROL CONSOLE SUPPORT SLIPS OUT OF POSITION.
Check the steering control console cover assembly.
If the steering control console assembly is damaged or defective--replace. Refer to paragraph 7-24.