ENGINE TROUBLESHOOTING AND MAINTENANCE PROCEDURES.
TEST OR INSPECTION
ENGINE USES TOO MUCH OIL.
Step 1. Check lubrication oil for proper weight.
Drain improper weight oil. Fill with correct weight oil. Replace oil filter. Refer to LO 5-3805-261-12.
Step 2. Check for oil leaks at the engine oil filter and oil drain plug. Refer to LO 5-3805-261-12.
If oil leaks are found at the oil filter or oil drain plug, tighten and/or replace gaskets.
For oil leaks in other areas, notify Direct Support.
ENGINE WILL NOT SHUT DOWN.
Step 1. Manually actuate governor control lever (Figure 6-2). Check for loose, binding or incorrectly adjusted
governor control linkage. Notify Direct Support.