PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
NOT FULLY MISSION
Be ALERT for personnel in the area while operating machine.
Always check to ensure area is clear of personnel and obstruc-
tions before starting engine, moving machine, or lowering or
raising blade. Failure to follow this warning may cause injury
or death to personnel or damage to equipment.
a. Ensure area around machine is
clear of all personnel and obsta-
b. Test brakes on hard, packed dirt.
c. Fasten seat belt before testing
d. Start and warm up engine (WP
e. Ensure air system is at operating
pressure of 11010 psi (75869
f. Raise blade and scarifier.
g. Operate machine in 2nd gear at
modulator Wheels do not skid. Notify
pedal, shift transmission to neu- Unit Maintenance.
tral, and apply parking brake.
Sectionaliza- Check sectionalization components Binding or damaged compo-
with the following steps:
nents if required for mission.
a. Remove two mounting bolts from
b. With assistance, position control
box in mounting bracket next to left
c. Check all cables and hoses for
damage and debris. Remove
debris. Notify Unit Maintenance if
d. Make sure electrical connector and
all hose ends have caps installed.