PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
NOT FULLY MISSION
0.1 Hours Engine Oil
To ensure an accurate reading, machine must be parked on
level ground. Allow machine to idle for 10 minutes.
a. Clean area around engine dipstick
and fill cap.
b. With engine at low idle, remove
dipstick, clean, and reinstall.
Remove dipstick and check level of
oil on ENGINE IDLING side of
dipstick. Level should be between
ADD and FULL.
c. Add oil (Item 10, 11, 12, 13, or 14,
filler opening. Reinstall fill cap.
d. Close engine compartment access
ENGINE OIL DIPSTICK
ENGINE OIL FILL CAP