TROUBLESHOOTING PROCEDURES - CONTINUED
TEST OR INSPECTION
EMS FAULT INDICATORS - CONTINUED
1. Check the battery cable
If corrosion is present, notify Unit
connections for corrosion.
Maintenance. If no corrosion is
present, go to test step 2.
If connections are loose, notify
2. Check the battery cable
connections for secure
Unit Maintenance. If connections
are not loose, go to test step 3.
damage and/or 1/2 in.
or more of deflection and/or is
deflection at mid-point of belt
damaged, notify Unit
on longest segment.
Maintenance. If belt is okay, go to
test step 4.
4. Inspect wiring harnesses and
If a wiring harness fault is found,
notify Unit Maintenance. If
problem still exists, notify Unit
Check fuel level in fuel tank.
EMS Fuel Level Indicator Flashes During
If indicator still
notify Unit Maintenance.