DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS - CONTINUED
ELECTRONIC MONITORING SYSTEM (EMS) PANEL
CONTROL OR INDICATOR
Coolant Temperature Fault
Flashes on and off when engine coolant temperature is above 225F
Flashes on and off indicating malfunction in charging circuit.
Low Fuel Level Indicator
Flashes on and off indicating low fuel level.
EMS Panel Test Switch
With battery disconnect switch on, hold test switch on and panel
indicators should flash and EMS fault light should blink. If any panel
indicators or the fault light does not work, notify Unit Maintenance.
Hydraulic Oil Temperature
Flashes on and off indicating hydraulic oil temperature is above 190F
Brake Air Pressure Fault
Flashes on and off when air pressure in either circuit is below 65 psi
(448 kPa). The EMS fault light and fault alarm are also activated.
Engine Oil Pressure Fault
Flashes on and off to indicate oil pressure is low. The EMS fault light
and fault alarm are also activated.